Weighing on static conveyor belts

An actual roller station is removed and installed on the PFREUNDT weigh beam, with belt speed tachometer,
especially built for static belts without too much vibrations,
weighing microprocessor PFREUNDT WK50S BW,
LCD display shows tons/hour, belt speed and total weight.

Easy self-assembly: you can easily assemble the BW-2 S yourself. In this way you save on additional service personnel, doubling the value of your weighing system. Follow the clearly laid out instructions.
Electronics pre-installed: prefabricated cables with plugs permit the straightforward connection of the sensor and tachometer to the WK 50S BW microprocessor. The electronics need not even be opened.
System pre-calibrated: the weighing electronics is factory pre-set. All you need to do is set a few belt parameters and the scale is independently precise and ready to be employed. If needed, you can further optimize the measured values in the installed scales by running comparative weighting and by fine-tuning the electronics.

In the new BW-2 S for static applications, you have a low-priced weighing system that you can assemble yourself. Clear instructions are included in the scope of supply.

+ integrated printer on tickets or separate rollprinter,
+ microprocessor, power supply transformer and heating unit built into a cabinet,
+ built-in relay switches when target weight is reached or when an error message is displayed or every “x” kg,
+ analogue output for automatic processes.

Watch the video

Platform scales

Platform scale with standard sizes, 1000 x 1000 mm, 1250 x 1250 mm or 1500 x 1500 mm,
Rated capacity 600, 1500 or 3000 kg or more,
Put on the floor with or without accessing slopes or built into a pit,
Smaller platform scales in many shapes, weights, accuracies and features,
Wider and heavier platform scales upon request,
Painted or stainless steel.
Chromed or stainless steel load cells.

Platform scale with low-built platform allows to roll drums on or drive on the pallettruck,
can be moved easily,
Rated capacities of 300 to 3000 kg.

U-shaped platform scale allows to move the pallet by a standard pallet truck,
Painted or stainless steel.
for Euro or “Chep” pallets.

2 separate weighbeams, adjustable inner distance,

Platform scale to weigh a complete and loaded forklift truck.

printer on paper coils or slips,
can be stamped in class OIML III (0,1%),
piece counting,
hot dipped galvanised or stainless steel,
cold storage,
ATEX protection.

Desktop scales

Model GRP:
stainless steel top plates, 150 x 150, 200 x 200, 250 x 250 or 300 x 300 mm, with a level gage,
rated capacities 3, 6, 15 or 30 kg,
trade approved,
1 load cell IP67 OIML R60 C3 or IP68 stainless steel as an option,
stainless steel structure in cold formed plate,
optional: 300 mm high post for the indicator,
indicator in ABS casing or stainless steel, with piece counting, set points, RS232 output to printer, 10 memorised tares,
power supply by batteries or adapter 230V~

Model BTM:
stainless steel top plates, 400 x 400, 600 x 600 or 800 x 800 mm, height 220 mm
rated capacities 30, 60, 150 300 or 600 kg,
painted or stainless steel structure,
1 aluminium loadcell IP65 or stainless IP67,
indicator in ABS or stainless steel housing, with piece counting, 10 memorised tares,
printer on paper rolls
trade approval OIML class III (0,1%),
piece counting,
coldstorage or ATEX protection,…

Model WS-60 en WS-120:
rated capacity 60 kg, shown in 20 g increments,
or 120 kg, shown in 50 g increments,
platform 380 x 300 x height 27 mm,
remote display with coil cable and 4 keys,
power supply by 4 of AAA batteries or adapter 230V~

Crane scales

Digital, type MCW, rated capacities from 150 to 35000 kg
Stainless steel housing, IP67,
LCD backlit display with 25 mm high digits,
Remote control up to 10m,
Rechargeable battery runs 40 hours, easily interchangeable,
Adjustable automatic cut-off to save power,
Adjustable digital filter,
Functions: PEAK, HOLD, SUM,
Safe load 200%,
Break load 500%.

+ trade approval class III (0,1%) up to 8000 kg, 3000 divisions,
+ attached thermal printer,
+ RF weight transmission to remote indicator and printer up to 70 m,
+ LED display with 20 or 40 mm high figures,
+ ATEX II 2G c IIC T4, non trade approvable, 6 to 30 tons.

Compact digital,
type MCWN,capacities from 300 to 9000 kg
LCD backlit display with 25 mm high digits,
Galvanised shackles,
Precision: +/- 0.03% of full scale,
Waterproof keyboard with 5 keys: ON/OFF, 0, TARE, MODE, PRINT,
Fitted with remote control up to 8m, may be configured by the customer as automatic tare only or as a 4-key remote keyboard,
Painted steel case,
Operating temperatures: -10/+ 40ºC,
Programmable digital filter and automatic cut-off,
Fitted with 4 Alkaline AA batteries (non-rechargeable), with 40-hour operating time of continuous functioning (or up to 3 months of typical non-continuous use, thanks to the auto switch-off function).
Fitted with storage case 41 x 26 x 24 cm.

+ trade approval CE-M (0,1%) up to 6000 / 5 kg,
+ swiveling bottom hook.

Digital, types STA en STR
remote control with 10m range,
Bright LED display, 30 mm high digits,
Summing up and Hold functions,
Heavy duty aluminium housing,
Rechargeable battery runs 50 hours, easily interchangeable,
Automatic cut-off to save power,
Tare range 100%,
Cannot be trade approved

Type STA: 4 capacities from 100 to 1000 kg
Type STR: 5 capacities from 1000 to 15000 kg

Crane scale and/or dynamometer to measure traction forces,
Supplied in a handy carrying case,
Backlit LCD display with 5 digits -25 mm high,
Display and keyboard in scale,
Display in kg, tons, lbs, N or kN,
Remote control with keys: zeto, tare, max. weight, low battery voltage, overload alarm.
Powered by 3x AA batteries,
Not for trade.

2 types remote control:
+ CHS M:

keyboard without display,
15 m range,
powered by 2x AAA batteries
+ CHS W:
keyboard with display,
50 m range,
powered by 4x AA batteries.

Spring suspended crane scale Salter
Diameter 150 or 250 mm dials,
ABS housing from 5 to 100 kg,
metal case from 5 to 300 kg.
Up to 15% zero adjustment.

Mechanical crane scale Dillon
Zero/tare range over 20% of capacity,
Precision max. ± 0,5% of full scale,
Safety factor minimum 4:1,
Anti-parallax dial and pointer offers accurate readings from varying sight lines,
Maximum indicator,
2 shackles, hook is optional,
> dial diameter 125 mm, from 200 kg to 10 tons,
high strength composite plastic housing,
supplied with ABS case.
> dial scale 250 mm, from 200 kg to 50 tons,
rugged cast aluminium case,
optional metal transport case to 10 tons
supplied with wooden case from 15 to 50 tons.

Crowbar weigher

Weighing crowbar for gas bottles and fire extinguishers:
allows weighing the bottles without lifting it manually: the crowbar is pushed under the bottle, the bottle is slightly lifted, then the weight is shown on the digital display,
built-in maintenance-free 12 Volts battery,

Very useful for maintenance engineers of fire protection equipment