|
|
|
On-board weighing
|
+ on trucks and trailers with air or leaf suspensions or mixed.
+ front with single or tandem steering axles,
+ back with single, double or triple axles, may be steering or lifting,
+ for all brands of vans, light or heavy trucks and trailers, for all capacities,
+ installation does not require any modification of the structure,
+ on new or used vehicles,
+ low price and easy installation on almost all trucks.
CargoWatch:
Avoid overload
Ensure optimum loading
For air suspension as well as mechanical suspension
Quick-full-load indication
Taring option
Easy to install and simple operation
Quick view of total weight and axle load
made in Denmark,
digital indicator in or outside the cabin,
aluminium box, 125 x 80 x 57 mm, IP66,
LCD display,
operating temperatures: -20 to +45°C,
accuracy: 1 - 2% of payload,
show gross and net weights per axle group.
Air pressure is measured in axle(s) with air suspension
Mechanical load sensor:
- measures the flexion of the mechanical suspension,
- easy to install on most trucks with leaf springs, providing there is enough space.
Option:
green - orange - red indicator,
compact unit to be installed in the dashboard
or in a bigger PVC box outside the cabin.
|
Mechanical load sensor
|
|
|
Low-built wheel weigh scales "BPRC":
|
Aluminium, IP66, only 18 mm thick makes drive on much easier,
Own weight 30 kg, total width 1010 x length 400 mm,
Acceptable overloading: 120%,
Operating temperatures: -10 - +50°C,
2 models:
10 or 15 tons per plate, 10 kg divisions,
Can be Trade approved, class Y(b), 50 kg divisions.
Weight display for maximum 4 platforms in a rack-type metallic case with rechargeable battery,
Alphanumeric LCD backlit display,
Integrated printer for weight/platform, weight for any combinations and total weight,
Subtotal of a number of weights,
Request a flat and solid floor.
Options:
- 4 foldable levelling carpets, each 3m long, to put in front and behind the scales to bring all wheels to the same height and increase the accuracy
- pit frames when installed into the floor.
|
|
|
|
WWS wheel weigh platforms
|
Height 58 mm, own weight 14,5 to 41,5 kg, depending of sizes and capacity,
Sturdy structure of special aluminium, IP65 to IP68 load cells,
Special vulcanised nonslip rubber underneath for good grip on all floors,
10 m cable with connectors to the indicator box,
Several sizes and capacities:
+ WWSB: 400 x 300 mm, 600 kg to 8 t,
+ WWSC: 500 x 400 mm, 1,5 to 15 t, can be trade-approved to 10 t,
+ WWSE: 700 x 450 mm, 6 t to 15 t, can be trade-approved to 10 t,
+ WWSD: 900 x 500 mm, 6 t to 15 t, can be trade-approved to 15 t.
Indicator DFWKR:
Multifunction digital weight indicator in metallic Rack version complete with 4 connectors for linking the platforms, built-in rechargeable battery,
Sizes 325 x 460 x height 170 mm, about 5 kg, with space for optional printer,
LCD backlit display with 6 25-mm high contrast digits and with indication of active functions.
connection to PC or radio modem,
Built-in rechargeable battery (10-hour minimum operating time, recharge in 8 hours) with fitted external 12 Vdc / 230 Vac adapter
Show the weight per wheel or total weight,
optional printer can be configured: 4 header lines, weight of each sngle platform, total weight for any combination, grand total of weighed vehicles, date and time.
Options:
- infrared remote control,
- up to 8 platforms,
- portable radiographic display and keyboard.
|
|
|
|
Standard wheel weigh pads
|
Portable weigh pads show on site the actual weights and avoids fines for overloading,
can weigh every vehicle like cars, vans, trucks, ...
A "master" pad weighs one wheel and displays the weight of each pad as well as the total weight, a "slave" pad weighs only. All slaves are cable connected to the master.
1 master + 1 slave weighs per axle. All axle weights can be accumulated.
1 master + 3 slaves weighs a complete truck on 2 axles.
Rated capacity 10 tonnes/weigh pad,
Weight shown per 5, 10 or 20 kg,
Safe overloading 150%,
Own weight per pad 18 kg.
|
|
|
|
